Removal & Installation: Engine: Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Install NEW exhaust manifold "V" band clamps. DO NOT tighten engine mount bolts until all other engine block-to-transaxle housing bolts have installed. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS . Add 8 qts (7.8L) of 50/50 mix of MOPAR® Extended Life Coolant (or equivalent) and distilled water. Bleed cooling system. See COOLING SYSTEM BLEEDING .