RECIRCULATION Door Actuator: Removal
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Open the hood and disconnect the negative battery cable remote terminal from the remote battery post. Remove the instrument panel.
- Remove the actuator retaining screws. Pull the actuator straight off the recirculation door shaft. Upon removal, note the shaft position of the actuator, because the shaft on this motor is keyed. When installing a new actuator, its shaft must be positioned in the same location. Disconnect the electrical connection. Remove the recirculation door actuator from vehicle.