LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Seat System) >> Component Tests >> Circuit Breaker
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Breaker

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate circuit breaker No. 2 (20-amp) in junction block, located under left side of instrument panel. Move circuit breaker for access to terminals, while maintaining proper electrical connection. Connect negative voltmeter lead to ground. With positive lead, check each terminal of circuit breaker for voltage.
  2. If battery voltage exists at both terminals, circuit breaker is good. If battery voltage exists at only one terminal, circuit breaker is defective. Replace circuit breaker. If battery voltage does not exist at either terminal, check for open or shorted circuit between battery and circuit breaker. See POWER DISTRIBUTION in appropriate SYSTEM WIRING DIAGRAMS article in ELECTRICAL. Repair as necessary.
scientia non olet · About LEMON Manuals