Wiper Arms

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, 2003 Chrysler 300M, and 2002 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: During high-speed wet glass operation, right-hand blade tip may override cowl screen slightly. This is normal and should not affect wiper system performance.

Cycle wiper into park position. Turn ignition off. Wiper blades are positioned to "tic" marks on windshield. Driver's side blade should be on or between two "tic" marks. Passenger's side blade should be on or near single "tic" mark. If arms do not align, check for bent, worn or loose parts. Align blades and tighten wiper nuts. Operate wipers and recheck park position.