Tension Strut: Description
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, 2003 Chrysler 300M, and 2002 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.
This vehicle uses a steel tension strut on each side of the vehicle's front suspension, between the lower control arm and front suspension cradle/crossmember (Figure). The strut has rubber isolator bushings, retainer washers and nuts at each end where it mounts.