LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Battery System & Charging System) >> Battery HOLDDOWN >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Battery HOLDDOWN: Removal

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the ignition switch and all accessories are OFF.
  2. Turn the steering wheel to the full right position.
  3. Disconnect and isolate the negative battery cable remote terminal from the remote battery post.
  4. Remove the air cleaner housing. Refer to the index for the location of the procedure.
  5. Remove battery splash shield. Refer to the Body section of the service manual for the procedure.
  6. Remove the two short bolts from the battery hold down and remove the hold down.
scientia non olet · About LEMON Manuals