Section 77 (Battery System & Charging System): Battery: Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Position the battery in the battery tray.
- Connect the positive and negative battery cables. Torque to 16 N.m (150 in. lbs.).
- Connect the heater blanket cord, if equipped.
- Install the battery hold down and install the hold down bolt. Torque to 16 N.m (150 in. lbs.).
- Install battery splash shield. Refer to the Body section for the procedure.
- Install the air cleaner housing.
- Connect the negative battery cable.