LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Battery System & Charging System) >> Generator >> Installation >> Installation - 3.5L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation - 3.5L

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install generator.
  2. Install the pivot bolt.
  3. Install the lower mounting bolt.
  4. Connect the B+ wire and tighten nut and tighten to 9.8 N.m (85 +/- 15 in. lbs.).
  5. Connect the generator field circuit connector.
  6. Install generator drive belt. Refer to GENERATOR/POWER STEERING BELT .
  7. Tighten the pivot bolt.
  8. Tighten the lower mounting bolt.
  9. Install the upper radiator support and tighten bolts.
  10. Connect the negative battery cable. Tighten all fasteners to the proper torque. Refer to the Torque Specifications chart in this section.
scientia non olet · About LEMON Manuals