Assembly - ICU
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Install the CAB (Figure ) on the HCU.
- Install the 4 bolts mounting the CAB (Figure ) to the HCU. Tighten the CAB mounting bolts to a torque of 2 N.m (17 in. lbs.).
- Plug the pump/motor wiring harness into the CAB (Figure ).
- Install the ICU in the vehicle. (Refer to INSTALLATION - ICU ).