Cd Changer: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Connect wiring and install CD changer into instrument panel. Make sure the rubber bumper engages into the instrument panel.
- Install two retaining screws to in-dash CD changer.
- Install instrument panel center trim bezel.
- Connect wiring connectors to HVAC controls, cigar lighter/auxiliary power outlet and traction control switch.
- Place center trim bezel into position and snap into place.
- Install ash receiver (if applicable).
- Connect the negative battery cable remote terminal to the remote battery post.