Monitor & Set Conditions
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
MAP Sensor Signal circuit is monitored with the engine speed between 600 and 3500 RPM, Throttle Position Sensor voltage less than 1.2 volts, and battery voltage greater than 10 volts. DTC P0108 will set when MAP sensor signal voltage is greater than 4.88 volts at start or with the engine running for 2.2 seconds.