Tail Lamp Unit: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Connect tail lamp unit wire connector to body wire harness.
- Place tail lamp unit in position on vehicle.
- Install nuts to attach tail lamp unit to lower trunk and quarter panel.
- Place trunk lining in position on lower trunk panel.
- Install fasteners to attach trunk lining to lower rear trunk panel.
- Verify lamp operation.