Wiper Arms: Removal
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Cycle the wiper arm/blades into PARK position and turn ignition OFF.
- Using a trim stick (special tool #C-4755) or equivalent, gently pry up on the wiper arm retaining nut cap and remove.
- Remove the retaining nut from the wiper arm pivot.
- Lift wiper arm to raise blade off glass and remove the arm from the pivot using a rocking motion and remove from vehicle.