Wiper Motor: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Place wiper motor in position onto wiper module.
- Install the three retaining bolts to the wiper motor (Figure ).
- Connect the wiper module master link to the motor crank by carefully snapping together. Do not damage ball and socket or seal.
- Install the wiper module. Refer to WIPER MODULE .
- Connect the negative battery cable remote terminal to the remote battery post.