Power Locks: Testing and Inspection

To disable the Automatic Door Lock feature, do the following:
1. Close all doors.
2. Place the ignition switch in the OFF position for at least 20 seconds.
3. Turn the ignition switch to the RUN position and to the OFF position without cranking the engine four times. The Malfunction lamp will come on each time the ignition switch is in the RUN position.
4. Press the power door lock button to lock the doors.
5. A single chime should sound to indicate that the feature has been changed successfully. If no chime, repeat procedure.
To enable the automatic feature, repeat Step 1 through Step 4.