Rear Seat Back: Installation: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Place rear seat back in position in vehicle.
- Engage hooks at top of seat back.
- Install inboard nuts and outboard bolts attaching rear seat back and belts to floor. Tighten to 40 N.m (29 ft. lbs.) torque.
- Install rear seat cushion (Refer to REAR SEAT CUSHION ).