Front Seat Back Cover: Installation: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not reuse the recliner assembly attaching bolts.
- Position cover at the top of seat back.
- Carefully roll cover down to the area that hog rings are to be installed.
- Install hog rings.
- Roll cover downward.
- Engage the J-strap retainer
- Install lumbar support handle, if equipped.
- Install new head restraint sleeve guides.
- Install front seat back (Refer to FRONT SEAT BACK ).
- Install head restraint (Refer to FRONT ARMREST ).
- Check seat back operation.