LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Sebring Limited >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Self-Diagnostics - Except Coupe >> Programming >> Transmission Control Module >> Quick Learn Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Quick Learn Procedure

  1. Before performing quick learn procedure, the following conditions must be met: brakes must be applied, engine speed must be more than 500 RPM, throttle angle must be less than 3 degrees and calculated oil temperature must be 60-200°F (16-93°C).
  2. Connect scan tool to Data Link Connector (DLC). DLC is located below driver's side of instrument panel. See Figure. Using scan tool, select TRANSMISSION, MISCELLANEOUS, then QUICK LEARN PROCEDURE. Follow steps displayed on scan tool to complete quick learn procedure.
scientia non olet · About LEMON Manuals