LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid R/T >> Repair and Diagnosis (Single Page) >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Removal & Installation >> Junction Block >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Open hood and disconnect the negative battery cable.
  2. Open the front drivers door and remove left end cap.
  3. Remove 2 screws from lower instrument panel cover. Pull rearward on lower instrument panel cover releasing clips. Disconnect deck lid release switch wiring, cable to hood release and remove cover from vehicle.
  4. Remove left knee blocker.
  5. Remove under column ducts.
  6. Remove junction block 4 mounting screws.
  7. Remove wire harness connectors from junction block and remove junction block.
  8. Disconnect BCM wire connectors and RKE antenna connector.
  9. Remove junction block from vehicle. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals