LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid R/T >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal & Installation

  1. Powertrain Control Module (PCM) is located on left side of engine compartment. See Fig 1. Turn ignition off. Note radio presets. Disconnect negative battery cable at remote battery terminal on passenger's side strut tower.
  2. Unbolt washer bottle filler neck and position out of way. Disconnect PCM connectors. Reposition wiring harness out of way. Remove PCM mounting bolts. Remove PCM from vehicle.
  3. To install, reverse removal procedure. Tighten PCM mounting bolts to specification. See TORQUE SPECIFICATIONS . Program PCM. See PROGRAMMING POWERTRAIN CONTROL MODULE .
Fig 1: Locating Powertrain Control Module & Power Distribution Center
G00112688Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals