Speed Control Cable: Installation

Install cable core wire through center hole on bracket, onto servo center post.
Install retaining clip to cable at servo.
Slide cable bell housing over servo mounting studs through the bracket.
Install 2 nuts, tighten to 60 INCH lbs. (7 N.m).
Slide cables into throttle cable bracket and engage retaining tabs.
Rotate the throttle cam forward to the wide open position and install speed control cable clasp.
Rotate the throttle cam forward to the wide open position and install throttle cable clasp.
Install engine cover and throttle control shield, if equipped.
Install the negative battery cable.
Install the air cleaner lid, makeup air hose.