Computers and Control Systems: Tools and Equipment

REQUIRED TOOLS AND EQUIPMENT
DRB III (diagnostic read-out box) scan tool
Evaporative System Diagnostic Kit # 6917
Fuel filler adapter # 8382
Fuel pressure adapter (C-6631) or # 6539
Fuel pressure kit (C-4799-B) or # 5069
Fuel release hose (C-4799-1)
Minimum Air flow fitting # 6714
Jumper wires
Ohmmeter
Oscilloscope
Vacuum gauge
Voltmeter
12 volt test light minimum 25 ohms resistance with probe # 6801

CAUTION: A 12 volt test light should not be used for the following circuits, damage to the powertrain controller will occur.

- 5 Volt Supply
- 8 Volt Supply
- J1850 PCI Bus
- CCD Bus
- CKP Sensor Signal
- CMP Sensor Signal
- Vehicle Speed Sensor Signal
- O2 Sensor Signal