Power Module (Front): Removal
WARNING: This page is about a different car, the 2002 Dodge Grand Caravan and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. Open the glove box.
- Flex both sides of the glove box bin inward near the top far enough for the rubber glove box stop bumpers to clear the sides of the glove box opening, then roll the glove box downward. Reach through the glove box opening to access and disconnect the instrument panel wire harness connector for the power module from the module connector receptacle.
- Reach through the glove box opening to access and disconnect the blower motor pigtail wire connector from the power module connector receptacle. Remove the 2 screws that secure the power module to the evaporator housing. Remove the power module from the evaporator housing.