LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Intrepid SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.5L) >> Oil Pump >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pump: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Prime oil pump before installation by filling rotor cavity with engine oil.
  2. Install oil pump and gasket carefully over the crankshaft. Position pump onto block and tighten bolts to 28 N.m (250 in. lbs.)
  3. Install new O-ring on oil pickup tube.
  4. Install oil pickup tube.
  5. Install oil pan. (Refer to INSTALLATION ).
  6. Install crankshaft sprocket. (Refer to INSTALLATION ).
  7. Install timing belt. (Refer to INSTALLATION ).
  8. Install the timing belt covers. (Refer to INSTALLATION ).
  9. Install the crankshaft vibration damper. (Refer to INSTALLATION ).
  10. Install the accessory drive belts. (Refer to ACCESSORY DRIVE ).
  11. Install the radiator fan. (Refer to RADIATOR FAN ).
  12. Fill the cooling system. (Refer to STANDARD PROCEDURE ).
  13. Fill engine crankcase with proper oil to the correct level.
scientia non olet · About LEMON Manuals