LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Intrepid SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.5L) >> Valve Stem Seals >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Valve Stem Seals: Installation

WARNING: This page is about a different variant/trim than selected.
  1. The valve stem seal/valve spring seat should be pushed firmly and squarely over the valve guide using the valve stem as guide. Do Not Force  seal against top of guide. When installing the valve retainer locks, compress the spring only enough  to install the locks.
    CAUTION: Do not remove garter spring around the seal at the top of the valve stem seal (Fig 1).
  2. Install valve spring. (Refer to INSTALLATION ).
    Fig 1: Checking Valve Tip Height And Valve Spring
    G02709755Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals