LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Intrepid SXT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.5L >> Oil Pan >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pan: Installation

  1. Apply a 1/8 inch bead of Mopar® Engine RTV GEN II at the parting line of the oil pump housing and the rear seal retainer (Fig 1).
    Fig 1: Identifying Oil Pan Sealing
    G02709814Courtesy of DAIMLERCHRYSLER CORP.
  2. Install oil pan gasket to the engine block.
  3. Install pan and attaching fasteners (Figure).
  4. Install the structural collar (Figure), using the follow procedure:
    1. Install the vertical  collar to oil pan bolts. Pretorque bolts to 1.1 N.m (10 in. lbs.).
    2. Install the horizontal  collar to transmission bolts and tighten to 55 N.m (40 ft. lbs.).
    3. Starting with center vertical bolts and working outward, final torque all bolts to 55 N.m (40 ft. lbs.).
  5. Lower vehicle and install dipstick and tube.
  6. Fill engine crankcase with proper oil to correct level.
  7. Connect negative cable.
scientia non olet · About LEMON Manuals