LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Liftgate System >> Transverse Bracket >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transverse Bracket: Installation

  1. Position the transverse bracket in the vehicle. Be certain the transverse bracket is properly positioned. The bracket should just touch the engage actuator arm and be positioned between the actuator arm and the motor housing.
  2. Torque the transverse bracket retaining bolts to the gear motor assembly to 9.5 N.m (85 in. lbs.). Do not tighten the transverse bracket retaining bolt, located under the window actuator at this time.
  3. Torque the gear motor assembly retaining bolts to 9.5 N.m (85 in. lbs.).
  4. Torque the final transverse bracket retaining bolt to 9.5 N.m (85 in. lbs.).
  5. Connect the gear motor assembly electrical connector and engage retaining pushpin.
  6. Install the appropriate D-pillar trim from the vehicle. Refer to BODY for the procedure.
scientia non olet · About LEMON Manuals