Front Fascia: Installation: Installation
- Connect wire connectors.
- Place fascia in position on vehicle, by fitting foam to bumper reinforcement. Use care not to scratch fender. Tape may be put on fender for protection.
- Install the top center fasteners, to upper radiator closure panel.
- Align fascia to bumper reinforcement.
- Align the two fascia studs to the fender vertical attachments, at the same time align the fascia groove on the horizontal flange with the fender fasteners. Push fascia rearward to engage the fasteners.
- Install nut on fascia stud through the splash shield access hole, on each side.
- Install fasteners attaching fascia to the front fender and splash shield.
- Install grommet.
- Install the fasteners attaching the fascia to the lower crossmember.