LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - Nag1 Automatic Transmission >> Shift Lever Assembly >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Shift Lever Assembly: Installation

  1. Connect the shift rod to the shift mechanism and install the retainer clip.
  2. Position the shift mechanism (1) in the vehicle.
  3. Install the retaining bolts (3). Tighten the bolts to 7 N.m (65 in. lbs.).
  4. Connect the wire harness (2) connectors at the rear of the shift mechanism.
  5. Install the front center console. See BODY article.
  6. Install the gear shift lever handle.
scientia non olet · About LEMON Manuals