LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Tune-Up >> Ignition System >> Knock Sensor >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Knock Sensor: Removal

  1. Remove the intake manifold. See 3.2L V6 article.
  2. Disconnect the wire harness connectors at the knock sensors (1) and remove the retaining bolts. Remove the knock sensors from the engine block.
    Fig 1: Removing Knock Sensors
    G01838153Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals