LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Liftgate System >> Pinch Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinch Sensor: Removal

  1. Open the liftgate.
  2. Disconnect and isolate the negative battery cable.
  3. Remove the trim panel from liftgate. Refer to LIFTGATE .
  4. Disconnect the pinch sensor wire harness connector.
  5. Remove the screws holding the pinch sensor to liftgate.
  6. Feed the pinch sensor wire harness out of the liftgate and remove the sensor from the vehicle.