LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Power Liftgate System >> Hinge >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Liftgate System: Hinge: Installation

NOTE: Use a suitable body sealer on the hinge to body mating surfaces prior to installation.
  1. If necessary, paint replacement hinge before installation.
  2. Place hinge in position on vehicle.
  3. Align hinge to marks on liftgate.
  4. Install bolts attaching hinge to liftgate (Figure ). Tighten bolts to 33 N.m (24 ft. lbs.) torque.
  5. Align hinge to marks on roof header.
  6. Install nuts attaching liftgate hinge to roof header. Tighten bolts to 23 N.m (17 ft. lbs.) torque.
  7. Verify liftgate alignment. (Refer to GAP AND FLUSH ).
scientia non olet · About LEMON Manuals