September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Integrated Power Module: Removal
- Disconnect and isolate the battery negative cable.
- Remove the hood cable retaining clip near the Integrated Power Module (IPM).
- Using a flat bladed tool, depress the four locking tabs on the side of the IPM (Fig 1
)
Courtesy of DAIMLERCHRYSLER CORP.
- Lift the IPM from the bracket.
- Disconnect the electrical harness connectors from the IPM.
- Disconnect the battery connection to the IPM by removing the nut attaching the connection to the bolt.