ICU (Integrated Control Unit): Assembly
Courtesy of DAIMLERCHRYSLER CORP.
- Align ABM solenoids and pump/motor wiring connector (4) with HCU valves (2) and connector passage. Slide ABM (1) onto HCU (3).
Courtesy of DAIMLERCHRYSLER CORP.
- Install three screws (2) attaching ABM (1). Tighten screws to 2 N.m (17 in. lbs.) torque.
- Attach mounting bracket to HCU. Install two mounting bracket attaching screws and tighten to 11 N.m (97 in. lbs.) torque.
- Install ICU in vehicle. (Refer to BRAKES/HYDRAULIC/MECHANICAL/ICU (INTEGRATED CONTROL UNIT) - INSTALLATION)