LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor-Manifold Absolute Pressure >> Installation >> 3.5L
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Sensor-Manifold Absolute Pressure: Installation: 3.5L

Fig 1: MAP SENSOR SIDE VIEW
GC0013137Courtesy of DAIMLERCHRYSLER CORP.
  1. Clean MAP sensor mounting hole at intake manifold.
  2. Check MAP sensor o-ring seal for cuts or tears.
    Fig 2: MAP SENSOR REMOVED
    GC0013144Courtesy of DAIMLERCHRYSLER CORP.
  3. Position sensor into intake manifold.
    Fig 3: 1/4 TURN TO REMOVE/INSTALL
    GC0013143Courtesy of DAIMLERCHRYSLER CORP.
  4. Rotate sensor 1/4 turn clockwise for installation.
    Fig 4: ELECTRICAL CONNECTOR
    GC0013142Courtesy of DAIMLERCHRYSLER CORP.
  5. Connect electrical connector to sensor.
  6. Lock electrical connector.
  7. Connect negative battery cable.
scientia non olet · About LEMON Manuals