Generator DECOUPLER Pulley: Installation
WARNING: This page is about a different car, the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Install the Generator Decoupler to the generator shaft.
- Use Special Tool #8433 (Figure ) to tighten the Generator Decoupler (Fig 1 ). Refer to the torque chart for the proper torque.
- Install the Air Box.
- Raise vehicle and support.
- Install accessory drive belt, refer to COOLING SYSTEM section for proper procedures (Figure ).
- Install the right front lower splash shield.
- Lower vehicle.
- Connect battery negative cable.