LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Power Seat System) >> Driver Seat Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver Seat Switch: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the power seat switch onto the outboard seat cushion side shield.
  2. Install and tighten the screws that secure the power seat switch to the inside of the outboard seat cushion side shield. Tighten the screws to 1.5 N.m (14 in. lbs.).
  3. Reconnect the power seat wire harness connector to the power seat switch connector receptacle.
  4. Position the outboard seat cushion side shield onto the seat cushion frame
  5. Install and tighten the screws that secure the outboard seat cushion side shield to the seat cushion frame. Tighten the screws to 1.5 N.m (14 in. lbs.).
  6. Install the switch knobs on the switch control levers, if equipped.
  7. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals