Idle Air Control Motor: Installation
WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
When servicing throttle body components, always reassemble components with new O-rings and seals where applicable. If assembly of component is difficult, a light coat of engine oil may be applied to the O-RINGS ONLY ( Fig 1 ) to aid assembly. Use care when removing hoses to prevent damage to hose or hose nipple.
- Carefully place idle air control motor into throttle body.
- Install mounting screw. Tighten screw to 7 N.m (62 in. lbs.) torque.
- Connect electrical connector to idle air control motor.
- Connect negative cable to battery.