Throttle Body: Installation
WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Install a new gasket, if required.
- Install throttle body.
- Tighten throttle body mounting bolts. The 2.4L to 28.2 N.m (250 +/-50 in. lbs.) torque, The 3.3/3.8L to 11.6 N.m (105 +/-20 in. lbs.) torque.
- Connect electrical connectors to the idle air control motor and throttle position sensor (TPS) (Figure) or (Figure).
- Install air inlet to throttle body hose clamp and tighten.
- Connect negative cable to battery cable.