LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 406 (Ignition System (Service Information)) >> Cable-Spark Plug >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cable-Spark Plug: Installation

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install cables into the proper engine cylinder firing order sequence.
  2. When replacing the spark plug and coil cables, route the cables correctly and secure them in the proper retainers. Failure to route the cables properly may cause the radio to reproduce ignition noise. It could also cause cross-ignition of the plugs, or, may short-circuit the cables to ground.
  3. When installing new cables, make sure a positive connection is made. A snap should be felt when a good connection is made.
  4. Refer to REMOVAL  for additional information.
scientia non olet · About LEMON Manuals