LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Seat Weight Sensor >> Removal >> Manual Passenger Front Seat
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Manual Passenger Front Seat

Fig 1: Removing/Installing Front Passenger Seat
GC0013585Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
  2. Remove front passenger seat (Refer to BODY/SEATS/SEAT - REMOVAL) .
    Fig 2: PASS SEAT MANUAL TRACK
    GC0013581Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the adjuster to riser mounting bolt (3). For additional information (Refer to BODY/SEATS/SEAT RISER - REMOVAL) .
    Fig 3: Seat Weight Sensor
    GC0016672Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the two nuts (2) holding the seat weight sensor (4) to the seat riser.
  5. Disconnect the one electrical connector (1).