Fuel Pump Module: Removal

WARNING: This page is about a different car, the 2005 Dodge SX, 2005 Dodge SRT-4, and 2005 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: RELEASE FUEL SYSTEM PRESSURE BEFORE SERVICING FUEL SYSTEM COMPONENTS. SERVICE VEHICLES IN WELL VENTILATED AREAS AND AVOID IGNITION SOURCES. NEVER SMOKE WHILE SERVICING THE VEHICLE.

Drain the fuel. Refer to STANDARD PROCEDURE - DRAINING FUEL TANK .
WARNING: THE FUEL RESERVOIR OF THE FUEL PUMP MODULE DOES NOT EMPTY OUT WHEN THE TANK IS DRAINED. THE FUEL IN THE RESERVOIR WILL SPILL OUT WHEN THE MODULE IS REMOVED.
Remove fuel tank, refer to FUEL TANK .
Lower tank. See Fig 1.
Use Special Tool 6856 to remove fuel pump module locknut. See Fig 2.
Remove fuel pump and O-ring seal from tank. Discard old seal.

Fig 1: Fuel Pump Module

Courtesy of DAIMLERCHRYSLER CORP.

1 - FUEL FILTER/PRESSURE REGULATOR

2 - FUEL LINE

3 - LOCKNUT

Fig 2: Fuel Tank

Courtesy of DAIMLERCHRYSLER CORP.

1 - SPECIAL TOOL 6856

2 - LOCKNUT