Compass/Temperature Mirror: Operation
WARNING: This page is about a different car, the 2005 Dodge SX, 2005 Dodge SRT-4, and 2005 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.
The optional compass/temperature mirror incorporates 2 reading lamp buttons, which also function as STEP and ZONE/CALIBRATION buttons. The desired function is obtained by pressing and holding a button depressed for a specific time period. The STEP button provides the selections between English and Metric. The Zone/Cal. button is used to change the compass zone or calibrate the compass.
The STEP button (right reading lamp button) operates a momentary contact switch, which is used to toggle through the following four modes:
- Turn the right reading lamp on and off.
- To select degrees Fahrenheit or Celsius for the temperature display (Press and Hold for 5 to 10 seconds).
- To turn display off (Press and Hold for 10 to 15 seconds).
The ZONE/CALIBRATION button (left reading lamp button) operates a momentary contact switch, which is used to toggle through the following two modes:
- Turn the left reading lamp on and off.
- To actuate compass Zone/Calibration modes (Press and Hold for 5 to 10 seconds).