Installation - Fold-In-Floor
WARNING: This page is about a different car, the 2005 Dodge Grand Caravan, 2005 Dodge Caravan, and 2005 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Be careful not to allow dirt/debris to fall into the fuel tank.
- Wipe seal area of tank clean and place a new O-ring seal in position on pump.
- Position fuel pump module in tank.
- Tighten lock ring using special tool #9340 to install the lock ring. See Figure.
- Install fuel tank, refer to INSTALLATION .
- Lower vehicle.
- Connect negative cable battery.
- Fill fuel tank. Use the DRB III(R) scan tool to pressurize the fuel system. Check for leaks.
- Install fuel filler cap.