Hard Wired Outputs
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
The hard wired outputs of the BCM include the following:
- Accessory delay relay control - power sunroof only
- Courtesy lamp driver
- Courtesy lamp load shed
- Door lock relay control
- Door unlock relay control
- Driver door unlock relay control
- Flip-up glass release motor driver
- Front fog lamp relay control
- Front wiper high/low relay control
- Front wiper on/off relay control
- Fused B(+) - lock, unlock and driver unlock relay feed
- Hazard lamp control
- High beam relay control
- Horn relay control
- Instrument cluster wake up signal
- Low beam relay control
- Park lamp relay control
- Rear fog lamp relay control - with rear fog lamps in markets where required only
- Rear window defogger relay control
- Tailgate lock driver
- Tailgate unlock driver
- Vehicle speed output
- Vehicle speed sensor supply - except with Antilock Brake System (ABS)
- VTSS indicator driver - with VTSS only
Refer to SYSTEM WIRING DIAGRAMS for additional details.