LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> PT Cruiser GT, 2D Convertible, Automatic >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Occupant Restraint Controller >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Occupant Restraint Controller: Removal

  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
  3. Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
  4. Remove the center console.
  5. Remove ORC module mounting nuts and ground eyelet, then remove module. See Fig 1.
    Fig 1: Occupant Restraint Controller - Remove/Install
    GC0023007Courtesy of DAIMLERCHRYSLER CORP.
  6. Disconnect ORC 23-way connector.
  7. Remove ORC from vehicle.
scientia non olet · About LEMON Manuals