LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Power Liftgate System >> Link Rod >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation

  1. Install the drive unit end of the link rod on its mounting sphere by gently pushing straight on.
  2. Push the plastic retainer down to lock the mechanism in position.
  3. Install the D-pillar trim on the vehicle. Refer to INTERIOR/EXTERIOR for the procedure.
  4. Install the liftgate end of the link rod on its mounting sphere by gently pushing straight on.
  5. Push the plastic retainer down to lock the mechanism in position.
  6. Close the liftgate and check for proper power liftgate operation.
scientia non olet · About LEMON Manuals