October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Knock Sensor: Removal

Fig 1: Disconnecting/Connecting Wire Harness Connectors At Knock Sensors

Courtesy of DAIMLERCHRYSLER CORP.

Remove the intake manifold from the engine. (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) - except SRT or (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) - SRT .
Disconnect the wire harness connectors at the knock sensors (1).
Remove the retaining bolts.
Remove the knock sensors from the engine block.