LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Suspension System) >> Rear >> Stabilizer Link >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stabilizer Link: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer bar to the stabilizer links and tighten to 95 N.m (60 ft. lbs.). See Figure.
  2. Lower the vehicle.
  3. Install the stabilizer link to the frame. Tighten to 95 N.m (60 ft. lbs.).
scientia non olet · About LEMON Manuals