Section 33 (Speed Control): Switch: Removal

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.

The speed control switch is mounted to the back of the multi-function switch. The multi-function switch must be removed first to gain access to the speed control switch mounting screw. See Fig 1.

Remove and isolate negative battery cable from battery.
Remove multifunction switch.
Remove switch mounting screw. See Fig 2.
Remove speed control switch from multi-function switch.
Unplug pigtail electrical connector from instrument panel wiring harness. See Fig 1.

Fig 1: SPEED CONTROL SWITCH LOCATION

Courtesy of DAIMLERCHRYSLER CORP.

1 - SWITCH HANDLE

2 - PIGTAIL ELECTRICAL CONNECTOR

3 - MULTI-FUNCTION SWITCH

Fig 2: SPEED CONTROL SWITCH REMOVAL/INSTALLATION

Courtesy of DAIMLERCHRYSLER CORP.

1 - SWITCH MOUNTING SCREW (1)

2 - SPEED CONTROL SWITCH

3 - SWITCH HANDLE

4 - MULTI-FUNCTION SWITCH